Lighting Control (KNX)

Filter Products Showing all 15 results
Brand
Amps
Function
Power
Series
Types
Voltage
  • Placeholder

    8 Fold, Room Controller Basis Device

    SKU: RC/A8.2

    KNX Lighting Series. Room Controller. Accommodates up to 8 plug-in modules. It controls their function and communicates as one bus device via the ABB i-bus®. Any module type can be plugged into each module slot. Manual operation for functional tests.
    $768.77 (excl. GST)
  • Placeholder

    1/2 Fold, Sensor

    SKU: 6125/98-509

    KNX Lighting Series Sensor. innovative colour concept (yellow=lighting, blue=blind, orange=RTC, magenta=scene and white=neutral/no function assigned) or standard illumination red/green. The accompanying symbol can be replaced by the symbols for lighting, blinds, room thermostat, szene and FanCoil.
    $259.26 (excl. GST)
  • 4 Fold Pulsed, Binary Input Module

    SKU: BE/M4.12.1

    KNX Lighting Series. Module for plugging into the Room Controller Basis Device.The device has 4 inputs for the connection of floating contacts.
    $265.42 (excl. GST)
  • 4 Fold 230V, Binary Input Module

    SKU: BE/M4.230.1

    KNX Lighting Series. Module for plugging into the Room Controller Basis Device.It has 4 inputs for the connection of 230 V contacts (AC or DC). The voltage is provided by the module.
    $265.42 (excl. GST)
  • 0.42A, Switch Mode Power Supply, 100-240VAC

    SKU: CP-D24/0.42

    KNX Lighting Series Switch Mode Power Supply from the CP-D range. This switch mode power supply offers a wide range input of 90-264 V AC and 120-375 V DC, rated input voltage is 100-240 V AC.
    $173.08 (excl. GST)
  • 24V Complete Interface Relay

    SKU: CR-S024VADC1CRS

    KNX Lighting Series. 24V Interface Relay.
    $32.25 (excl. GST)
  • 230V Complete Interface Relay

    SKU: CR-S230VADC1CRS

    KNX Lighting Series. 24V Interface Relay.
    $41.80 (excl. GST)
  • 2 Fold, Actuator Module

    SKU: SA/M2.6.1

    KNX Lighting Series. Actuator Module for plugging into the Room Controller Basis Device. Switches currents up to 16 A with two relays (max continuous current 6 A).
    $160.63 (excl. GST)
  • 160mA MR, EIB Powder Supply Choke

    SKU: SV/S30.160.1.1

    KNX Lighting Series Power supply. 160 mA generate and monitor the KNX system voltage (SELV). The bus line is decoupled from the power supply by an integrated choke.
    $322.14 (excl. GST)
  • 320mA, Powder Supply with Diagnostics

    SKU: SV/S30.320.1.1

    KNX Lighting Series Power supply. 230 mA generate and monitor the KNX system voltage (SELV). The bus line is decoupled from the power supply by an integrated choke.
    $464.70 (excl. GST)
  • 1 Fold, Universal Dimmer Actuator

    SKU: UD/M1.300.1

    KNX Lighting Series 1 channel Dimmer. For dimming incandescent lamps, 230 V or low halogen lamps with up to 300 W/VA. Automatic load detection. Compensated against ripple-control and voltage fluctuations.
    $327.27 (excl. GST)
  • 2 Fold, Universal Dimmer Actuator

    SKU: UD/S2.300.2

    KNX Lighting Series 2 channel Dimmer. For dimming incandescent lamps, 230 V or low halogen lamps with up to 300 W/VA. Automatic load detection. Compensated against ripple-control and voltage fluctuations.
    $647.68 (excl. GST)
  • 2 Fold, Universal Interface

    SKU: US/U2.2

    KNX Lighting Series. Universal Interface with 2 channels which can be parameterised as inputs or outputs, e.g. for connector of conventional push-buttons, auxiliary contacts, LEDs and electronic relays.
    $106.51 (excl. GST)
  • 4 Fold, Universal Interface

    SKU: US/U4.2

    KNX Lighting Series. Universal Interface with 4 channels which can be parameterised as inputs or outputs, e.g. for connector of conventional push-buttons, auxiliary contacts, LEDs and electronic relays.
    $175.25 (excl. GST)
  • USB, MDRC Interface

    SKU: USB/S1.1

    KNX Lighting Series. USB interface enables the communication between the PC and the EIB/KNX system.
    $453.52 (excl. GST)