New CellTec website up and running


So fresh and so clean! Our New CellTec website is up and running

It’s been a long time coming but as you can see, we have redesigned our website with you in mind. Providing a clearer and simpler website design to help you get to where you want to go. Whether it’s reading our informative articles, buying particular products or simply wanting to get in contact with us.

Our Resources centre includes our articles, videos and a Download area where you can find datasheets, manuals and catalogues for products available through CellTec Engineering Automation Systems.

Our Store is comprised of three areas in particular.

  1. Control and Automation Components – for all the gadgets you might need to complete a project.
  2. Industrial Safety – for large scale manufacturing projects where safety for your employee is paramount. Based primarily around our alias, Zone Safety Systems.
  3. Customised Solutions – providing designs and equipment for projects that are specialised to suit a specific customers needs.

If you would like to know a bit more about us and who our Product Partners are then these details can be found under the Contact submenu. We’re also getting into social media more frequently so connect with us on Facebook here.

We’d love to hear any feedback from you as well. If there is something in particular that drew you to view our website but it wasn’t exactly what you were looking for then let us know.

Building a website that is more inclusive and informative is important to us.

getting connected

Getting connected!

We live in an era of connectivity. There is a need to know what is happening, where and to know it now. This is no different in the industrial area, where information or the lack thereof can be measured, and it is often a large figure.

Knowing what the equipment is doing, the production rates, down times, fault locations, are all examples of things we need to know to improve the efficiency. At the start of my career in manufacturing, I was given an important piece of advice: “You can’t control what you don’t measure”. It was a simple statement, but one that stuck with me and as time moved on, I learned just how true that statement was.

It is one thing to know it, and it is another thing to do it. The next lesson was to learn to fear this other piece of advice: “You just need to connect product A to product B”. I’m not sure there is a statement that brings more fear into the heart of an integrator than that one. It seems that there are countless platforms, networks and protocols in the industrial area that will solve this issues. Even when the interfaces have the same name, it doesn’t guarantee it will be simple.

There are Bus Gateways or Protocol converters which allow two systems to talk to each other and exchange information. These devices however are typically expensive, and while effective in large systems, they can be prohibitive in a small system or application, where only 1 or two devices need to be connected.

Renu Electronics solves this dilemma with a low-cost, yet highly flexible range of gateways. These units allow a cost-effective connection even when only one device needs to be connected. Typical applications include linking 2 PLCs that are running different networks, connecting a PLC to Variable Speed Drives (VSD’s), and linking SCADA systems to various field devices or sub-networks. The flexibility of having specific drivers for certain PLC’s and drives, along with configurable data sets, means the gateway can reduce the work required to program the PLC/SCADA system.

For example, you have a PLC that needs to connect to a VSD and a couple of tank level sensors. Your PLC has a MODBUS interface so implementing a simple RS485 network will keep the wiring to a low-cost and be easy to install. The bad news is the VSD doesn’t have MODBUS, but it does have a serial connection. The level sensors have a HART interface and you have a potential aneurism wanting to burst. What’s more, the customer would love to have a web interface to be able to log in and see what is happening in his tanks any time. Now before you give up in defeat, this can all be achieved by implementing the Renu gateways. A GWY-00 Serial converter takes care of the exchange between the MODBUS and the Serial Drive, a GWY-800 provides a MODBUS to HART network connection, and the GWY-610 provides a MODBUS to Ethernet interface and has a built-in web server to allow the customer to have a webpage to keep an eye on everything.

The gateways are all configured with the free software, ensuring the various data fields you want are selected and are placed into a simple continuous structure on the MODBUS side. This allows the PLC to only deal with the data it needs to. It has everything in a simple group rather than trying to find information amongst a large buffer of data. It also ensures the network is efficient by exchanging only the data that is needed, rather than the entire data set for each device. The gateway can also run different data sets on different exchange rates. This way critical data can be updated every cycle, but diagnostic data, for example, can be sent every 5 cycles. You can choose which data and when. Some interfaces even support data on request (asynchronous).

Another bit of free software allows you to configure the webpage(s) in the GWY-610 and ensure the customer can see what is happening at any time and he can view it on his favorite browser.

Want to learn more about these Renu Electronics gateways? Get in touch with CellTec to find the best ways to connect to your world.




Solving motor condensation and freezing problems

In refrigerated cold stores and freezers, using automated equipment, and conveyor systems, often results in higher than normal maintenance costs and system down times, due to electric motors having condesation forming internally and even freezing when the motors are stationary. While the problems are not always resulting in an immediate failure, the lifetime of the motor is often significantly reduced.

Replacement costs and equipment down time reduce the productivity and profitability of the system. ABB, world leaders in electrical products and solutions, have introduced the new PSTX softstarter range with a feature designed to solve this problem.


When a motor is stationary, the softstarter injects a small DC current into a winding, generating enough heat to stop condensation and/or freezing of the motor. This provides greater lifetime of the motor and reduced maintenance costs. Additionally using a softstarter ensures a controlled start reducing the mechanical stress caused by typical DOL or start/delta starters. This increases the mechanical life of belts and bearings, provides smooth motion for transported products and materials, and significant reductions in peak energy demand, ensure the site supply network is lessed stressed, resulting in further reduced maintenance costs.

There is also a new mode called “Limp Mode”. This ensures even if there is a failure on one of the drive thyristors (the electronic driver element for each phase), the softstarter can still operate until repaired at a more convenient time.

Other integrated features include, detachable operator panel, integrated bypass contactor, Electronic overload, even application set-up wizards, all providing fast and compact installation, set-up, commissioning, and diagnostics.

Reducing maintenance costs and increasing uptime, all goes straight to the bottom line in increased profits. and operation productivity.

Another solution from CellTec. Engineering. Automation. Safety