| Safety Technology - Sensor Accessories |
UDC - Mounting Columns for Light Curtains and Grids
The mounting columns UDC are used in order to mount Leuze lumiflex light grids and light curtains in a freestanding position. Not only do they allow a precise vertical and axial alignment, but they also protect the sensors from damage. The UDC-1000 can handle 2-beam COMPACT, ROBUST, or AREAL light grids or light curtains with protected heights of up to 900 mm. The UDC-1300 is designed for 3- or 4-beam light grids or light curtains with protected heights of up to 1200 mm.
Advantages
- Special spring elements automatically reset the position in case of mechanical impacts
- Includes a complete assembly kit for both device and floor mounting
- Easy to mount; vertical and axial adjustment can be quickly completed in just a few steps
- Sturdy, attractively designed profile construction
|
|
|
|
|
 |
|
UMC - Mirror Columns for Light Curtains and Light Grids
The mirror columns UMC are used for the beam deflection of light grids and light curtains in order to achieve multisided safeguarding of danger zones. They allow for a precise vertical and axial alignment of the mirrors. Spring elements at the base of the column provide for automatic reset following mechanical impacts. UMC-1002, -1303 and -1304 are equipped with 2, 3 and 4 single mirrors for the beam deflection of single light axes. UMC-1000, UMC-1300, UMC-1600, and UMC-1900 have one continuous mirror surface for the beam deflection of light curtains.
Advantages
Special spring elements automatically reset the position in case of mechanical impacts
Includes a complete assembly kit for floor mounting
Easy to mount; vertical and axial adjustment can be completed quickly in just a few steps
Exchangeable, individually adjustable single mirrors
Light axis interval in accordance with EN 999
Sturdy, attractively designed profile construction
|
|
|
|
|
 |
|
PM 2-500 / PM 2-500V - Passive Deflection Mirror for 2-beam light grids
The PM 2-500 and PM 2-500V are each designed for use as the deflecting mirror unit for ROBUST safety light grids RRT 42, RRT 22 and the COMPACTplus Muting Transceiver CPRT-m. The integrated, optically aligned mirror system ensures simple mounting and alignment, substantially decreasing the start-up time as compared with single mirrors.
Used in combination with ROBUST light grids, PM 2-500 is suited for sensing zone widths of up to 4 m. The integrated mirror system is able to tolerate deviations in vertical alignment.
With its expanded mirror system, the PM 2-500V used in combination with ROBUST light grids can handle sensing zone widths of up to 8 m. The maximum operating range together with CPRT-m amounts to 6.5 m. The V-mirror system tolerates not only vertical but also axial deviations in alignment.
Advantages
- Easy alignment due to integrated, optically aligned mirror system
- Ranges of up to 2,5 m (PM 2-500) or 8 m (PM 2-500V)
- Enclosed profile housing prevents contamination of and damage to the mirrors
- Adjustable M6 sliding brackets for fast and easy mounting
- PM 2-500 tolerates vertical deviations in alignment
- PM 2-500V tolerates both vertical and axial deviations in alignment
|
|
|
|
|
 |
|
PM 4 / PM 4V - Passive Deflection Mirror for 4-beam light grids
The PM 4-300 and PM 4-300V are each designed for use as the deflecting mirror unit for ROBUST safety light grids RRT 44 and RRT 24. The integrated, optically aligned mirror system ensures simple mounting and alignment, substantially decreasing the start-up time as compared with single mirrors. Used in combination with ROBUST light grids.
PM 4-300 is suited for sensing zone widths of up to 4 m. The integrated mirror system is able to tolerate deviations in vertical alignment.
With its expanded mirror system, the PM 4-300V used in combination with ROBUST light grids can handle sensing zone widths of up to 8 m. The V-mirror system tolerates not only vertical but also axial deviations in alignment.
Advantages
- Easy alignment due to integrated, optically aligned mirror system
- Ranges of up to 2,5 m (PM 4-300) or 8 m (PM 4-300V)
- Enclosed profile housing prevents contamination of and damage to the mirrors
- Adjustable M6 sliding brackets for fast and easy mounting
- PM 4-300 tolerates vertical deviations in alignment
- PM 4-300V tolerates both vertical and axial deviations in alignment
|
|
|
|
|
 |
|
AMI 42 - Active beam deflection for ROBUST 2-beam light grids
AMI 42 is an active deflecting mirror with an integrated transmitter and receiver system. The infrared light signals picked up by the receiver are sent back unchanged via the transmitter to the safety system. High function range is achieved by the amplification of the light signal. AMI 42 is applicable together with the multiple light beam safety devices RRT 42 and RRT 22.
Advantages
- Beam distance 500 mm (according to EN 999)
- Active deflecting mirror in sturdy aluminium extrusion profile
- Simple alignment because of optical parts with +/- 2 ° effective beam width
- Integrated lens heating system for use in extreme environmental conditions
- Simple mounting via adjustable M6 sliding brackets
|
|
|
|
|
 |
|
| US 1 / US 2 / US 2.1 / US 2.2 |
US 1 / US 2 / US 2.1 / US 2.2 - Deflecting Mirror for Light Barriers
The deflecting mirrors serve to deflect the beam of the individual light axes of e.g. Type 4 or Type 2 safety light barriers. The mirror mounts allow for an exact adjustment in all three axes.
US 2/2.1/2.2:
Glass mirror in aluminium extrusion profile
Advantages
- US 2: Mirror support on mounting plate can be adjusted 90°.
|
|
|
|
|
 |
|
UM60-300...1050 - Deflecting Mirrors for Safety light curtains
The Deflecting Mirrors with narrow mirror carrier are used for the beam deflection of light curtains in order to achieve multi- sided safeguarding of danger zones. Sliding blocks and mounting brackets (accessories) allow a easy and precise alignment.
Advantages
- continuous mirror surface for beam deflection of light curtains
- sturdy aluminium profile
- narrow and flat construction
- Mounting brackets allow mounting and alignment in the preference angles 0, 45, 90° as well as swivel-mounted.
|
|
|
|
|
 |
|
LA - Laser Alignment Aids
LA Laser Alignment Aids are battery-operated red-light lasers used for the quick and easy adjustment of Leuze lumiflex optical sensors. They are available in several versions for adapting to the various Leuze lumiflex sensors.
Advantages
- Red-light laser, Protective class 2
- Sturdy aluminum housing
- Battery-operated
- Versions suitable for COMPACT, ROBUST, SLS 78, ECO (in the mounting profile), AREAL and DIALOG
|
|
|
|
|
 |
|
MMS - Muting Mounting System
The MMS Muting-Mounting-System enables in combination with light grids with integrated Muting (Areal-M,COMPACTplus)or Robust with MCB and Mounting columns UDC/DC to realize complete Muting-Applications in a easy and convenient manner.
Advantages
- Mounting system for Muting-Applications
- Slim, attractively designed profile
- Flexible mounting plate for attaching the MMS to the column
- Mounting of Muting-Sensors to MMS with 12 mm-V2A-round rods
- Adjustment of sensors horizontal and vertical in a big range
- MMS-P-1000 includes reflectors and mounting devices
|
|
|
|
|
 |
|
Muting Lamps MS
The muting lamps of the MS range serve to signal the bypass status
of protective devices (muting) as defined by IEC, EN 61496-1.
Advantages
- Quick mounting via bayonet-type system (MS 70/2, MS 70/LED)
- Enclosure rating IP 54
- 360° emission range
- Blinking signal for muting restart
- LED elements with a service life > 50,000 h
- can be connected to all Leuze lumiflex safety EMERGENCY STOP switching devices that have muting functionality
|
|
|
|
|
 |
|
|
