| Aluminium Profile Systems - Joining Components |
| M8-16 Bracket Connector (40 Series) |
| Suits 40 series profilesConsists of one M8x20 bolt and one bracket |
|
|
|
|
 |
|
| 40x80 Plate Connector (40 Series) |
| Suits 40 series profilesConsists of two M8x20 bolts and one 40x80 plate |
|
|
|
|
 |
|
| Bolt Connector 40 (40 Series) |
Suits 40 series profiles, consits of:
One 10mm pin, 35mm longTwo M6x30 cap screwsTwo 16x16x6/M6 square nuts |
|
|
|
|
 |
|
| Bolt Connector 80 (40 Series) |
Suits 40 series profiles, consits of:
One 10mm pin, 74mm longTwo M6x30 cap screwsTwo 16x16x6/M6 square nuts |
|
|
|
|
 |
|
| M8-10 Bracket Connector (30 Series) |
| Suits 30 series profilesConsists of one M8x16 bolt and one bracket |
|
|
|
|
 |
|
| 30x60 Plate Connector (30 Series) |
| Suits 30 series profilesConsists of one M8x16 bolt and one bracket |
|
|
|
|
 |
|
| Bolt Connector 30 (30 Series) |
Suits 30 series profiles, consits of:
One 10mm pin, 30mm longTwo M6x30 cap screwsTwo 16x16x4/M6 square nuts |
|
|
|
|
 |
|
| Bolt Connector 60 (30 Series) |
Suits 30 series profiles, consits of:
One 10mm pin, 60mm longTwo M6x30 cap screwsTwo 16x16x4/M6 square nuts |
|
|
|
|
 |
|
| Used with 40 series profilesMaterial: die cast aluminium |
|
|
|
|
 |
|
| Used with 40 series profilesMaterial: aluminium |
|
|
|
|
 |
|
| Aluminium Angle - 32x25x3 |
Can be used for mounting panels, table tops, switches, accessories, assembly jigs and fastening profiles
Used with 40 and 30 series profiles |
|
|
|
|
 |
|
| Aluminium Angle - 32x32x4 |
Can be used for mounting panels, table tops, switches, accessories, assembly jigs and fastening profiles
Light Duty AngleUsed with 40 series profiles |
|
|
|
|
 |
|
| Aluminium Angle - 40x40x6 |
Can be used for mounting panels, table tops, switches, accessories, assembly jigs and fastening profiles
Light Duty AngleUsed with 40 series profiles |
|
|
|
|
 |
|
Used with bracket connector when additional joint strength is required
Material: 3mm mild steel, z/platedbolts and square nuts not included |
|
|
|
|
 |
|
Used with bracket connector when additional joint strength is required
Material: 3mm mild steel, z/platedbolts and square nuts not included |
|
|
|
|
 |
|
Use for adjusting angle in shelves or just pivoting two aluminium profiles where quick and easy adjustment is required
Material: 3mm mild steel, z/platedBots, square nuts and adjustable handle are not included |
|
|
|
|
 |
|
| Sliding Bar 16x5x140 (4xM6) |
Typical application:
Fastening element for facilitated unit assembly (valves, limit switches)Joining and extending profiles vertically or horizontallyEasy positioning and fixing in the profile groove
Used with 40 series profilesMaterial: 16x5mm mild steel, z/plated |
|
|
|
|
 |
|
| Sliding Bar 16x5x70 (2xM6) |
Typical application:
Fastening element for facilitated unit assembly (valves, limit switches)Joining and extending profiles vertically or horizontallyEasy positioning and fixing in the profile groove
Used with 40 series profilesMaterial: 16x5mm mild steel, z/plated |
|
|
|
|
 |
|
| Sliding Bar 16x3x140 (4xM6) |
Typical application:
Fastening element for facilitated unit assembly (valves, limit switches)Joining and extending profiles vertically or horizontallyEasy positioning and fixing in the profile groove
Used with 30 series profilesMaterial: 16x3mm mild steel, z/plated |
|
|
|
|
 |
|
| Sliding Bar 16x3x70 (2xM6) |
Typical application:
Fastening element for facilitated unit assembly (valves, limit switches)Joining and extending profiles vertically or horizontallyEasy positioning and fixing in the profile groove
Used with 30 series profilesMaterial: 16x3mm mild steel, z/plated |
|
|
|
|
 |
|
| Bracing Element 40x40 (360mm) |
Typical application:
Simple and fast way of reducing profiles bending or sagging under heavier vertical loadsReduces frames buckling and stabilize frame structure
Used only with 40 series profilesMaterial: 40x40 profileComplete with bolts and square nuts |
|
|
|
|
 |
|
Typical application:
For floor or wall fastening in various positionsSuitable for 30 and 40 series profilesMaterial: mild steel, z/plated |
|
|
|
|
 |
|
Typical application:
Universal fastening element for mounting of any componenets to profilesParticularly suitable for heavier load capacityAllows easy movement within the slot
For 30 and 40 series profilesMaterial: mild steel, z/plated |
|
|
|
|
 |
|
Typical application:
Universal fastening element for mounting of any componenets to profilesParticularly suitable for heavier load capacityAllows easy movement within the slot
For 30 and 40 series profilesMaterial: mild steel, z/plated |
|
|
|
|
|
|
Typical application:
Universal fastening element for mounting of any componenets to profilesParticularly suitable for heavier load capacityAllows easy movement within the slot
Used with 40 series profilesMaterial: mild steel, z/plated |
|
|
|
|
 |
|
Typical application:
Universal fastening element for mounting of any componenets to profilesParticularly suitable for heavier load capacityAllows easy movement within the slot
Used with 40 series profilesMaterial: mild steel, z/plated |
|
|
|
|
|
|
Typical application:
Universal fastening element for mounting of any componenets to profilesParticularly suitable for heavier load capacityAllows easy movement within the slot
Used with 40 series profilesMaterial: mild steel, z/plated |
|
|
|
|
 |
|
Typical application:
Can be inserted at any point in the profile slotParticularly suitable for additions into existing installations
Used with 40 series profilesMaterial: mild steel, z/plated |
|
|
|
|
 |
|
Typical application:
Can be inserted at any point in the profile slotParticularly suitable for additions into existing installations
Used with 40 series profilesMaterial: mild steel, z/plated |
|
|
|
|
|
|
Typical application:
Light duty fastener can be inserted at any point in the profile slotParticularly suitable for additions into existing installations
Used with 30 and 40 series profilesMaterial: mild steel, z/plated |
|
|
|
|
 |
|
Typical application:
Light duty fastener can be inserted at any point in the profile slotParticularly suitable for additions into existing installations
Used with 30 and 40 series profilesMaterial: mild steel, z/plated |
|
|
|
|
|
|
| 16x16x3 Square Washer (6mm) |
Typical application:
Suitable for 30 and 40 series profiles for face fastening (slots are facing each other), angled connectionRight angled connection when squared cut panels are usedNot suitable for heavier loads
Material: 3mm mild steel, z/plated |
|
|
|
|
 |
|
| 16x16x3 Square Washer (8mm) |
Typical application:
Suitable for 30 and 40 series profiles for face fastening (slots are facing each other), angled connectionRight angled connection when squared cut panels are usedNot suitable for heavier loads
Material: 3mm mild steel, z/plated |
|
|
|
|
|
|
|
